 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| NEC's 4-PIN SOP 400 V BREAK DOWN VOLTAGE PS7241E-1A 1-CH OPTICALLY COUPLED MOS FET FEATURES * SMALL AND THIN PACKAGE: 4-pin SOP, Height = 2.1 mm * 1 CHANNEL TYPE (1 A OUTPUT) * DESIGNED FOR AC/DC SWITCHING LINE CHANGER * LOW OFFSET VOLTAGE * ORDERING NUMBER OF TAPING PRODUCT: PS7241E-1A-E3, E4, F3, F4 * UL AWAITING APPROVAL * BSI AWAITING APPROVAL DESCRIPTION NEC's PS7241E-1A is an optically coupled solid state relay that combines a GaAs infrared LED on the input side with a normally-open MOS FET on the output side to realize an excellent cost performance. The small, thin package and high sensitivity of this relay makes it ideal for battery-driven mobile devices, and its small offset voltage at power-on and good linearity are also make it suitable for controlling micro analog signals. APPLICATIONS * Laptop PC, PDA * Modem card * Telephone, FAX * Measurement equipment California Eastern Laboratories PS7241E-1A PACKAGE DIMENSIONS (UNIT: mm) 4.00.5 TOP VIEW 4 3 1. LED Anode 2. LED Cathode 3. MOS FET 4. MOS FET 1 2 7.00.3 4.4 2.05+0.08 -0.05 0.15+0.10 -0.05 0.05+0.08 -0.05 2.54 0.40+0.10 -0.05 0.25 M 0.50.3 PS7241E-1A ORDERING INFORMATION Part Number PS7241E-1A PS7241E-1A-E3 PS7241E-1A-E4 PS7241E-1A-F3 PS7241E-1A-F4 Embossed Tape 3 500 pcs/reel Package 4-pin SOP Packing Style Magazine case 100 pcs Embossed Tape 900 pcs/reel Application Part Number*1 PS7241E-1A *1 For the application of the Safety Standard, following part number should be used ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified) PARAMETER Diode Forward Current (DC) Reverse Voltage Power Dissipation Peak Forward Current *1 MOS FET Break Down Voltage Continuous Load Current Pulse Load Current*2 (AC/DC Connection) Power Dissipation Isolation Voltage *3 Total Power Dissipation Operating Ambient Temperature Storage Temperature SYMBOL IF VR PD IFP VL IL ILP PD BV PT TA Tstg RATINGS 50 5.0 50 1 400 120 240 300 1 500 350 -40 to +85 -40 to +100 UNIT mA V mW A V mA mA mW Vr.m.s. mW C C *1 PW = 100 s, Duty Cycle = 1% *2 PW = 100 ms, 1 shot *3 AC voltage for 1 minute at TA = 25C, RH = 60% between input and output PS7241E-1A RECOMMENDED OPERATING CONDITIONS PARAMETER LED Operating Current LED Off Voltage SYMBOL IF VF MIN. 4 0 TYP. 10 (TA = 25C) MAX. 20 0.5 UNIT mA V ELECTRICAL CHARACTERISTICS PARAMETER Diode Forward Voltage Reverse Current MOS FET Off-state Leakage Current Output Capacitance Coupled LED On-state Current On-state Resistance SYMBOL VF IR ILoff Cout IFon Ron1 Ron2 Turn-on Time*1 Turn-off Time*1 Isolation Resistance Isolation Capacitance ton toff RI-O CI-O (TA = 25C) CONDITIONS MIN. TYP. 1.2 MAX. 1.4 5.0 1.0 18 4.0 22 17 0.5 0.07 109 0.5 35 23 1.0 0.2 pF ms UNIT V A A pF mA IF = 10 mA VR = 5 V VD = 400 V VD = 0 V, f = 1 MHz IL = 120 mA IF = 10 mA, IL = 10 mA IF = 10 mA, IL = 120 mA, t 10 ms IF = 10 mA, VO = 5 V, RL = 500 , PW 10 ms VI-O = 1.0 kVDC V = 0 V, f = 1 MHz *1 Test Circuit for Switching Time Input VL 50% 0 Pulse Input IF VO = 5 V Input monitor Rin RL VO monitor Output 90% 10% ton toff PS7241E-1A TAPING SPECIFICATIONS (Units in mm) Outline and Dimensions (Tape) 2.00.05 4.00.1 1.750.1 1.5+0.1 -0 2.9 MAX. 12.00.2 5.50.05 1.550.1 8.00.1 7.40.1 4.60.1 2.40.1 0.3 Tape Direction PS7241E-1A-E3 PS7241E-1A-E4 Outline and Dimensions (Reel) 2.00.5 2.00.5 13.00.2 180+0 -1.5 21.00.8 R 1.0 60 +1 -0 13.51.0 17.51.0 Packing: 900 pcs/reel 11.9 to 15.4 Outer edge of flange PS7241E-1A TAPING SPECIFICATIONS (Units in mm) Outline and Dimensions (Tape) 2.00.05 4.00.1 1.750.1 1.5+0.1 -0 2.9 MAX. 12.00.2 5.50.05 1.550.1 8.00.1 7.40.1 4.60.1 2.40.1 0.3 Tape Direction PS7241E-1A-F3 PS7241E-1A-F4 Outline and Dimensions (Reel) 2.00.5 2.00.5 13.00.2 R 1.0 21.00.8 3302.0 1001.0 13.00.2 13.51.0 17.51.0 Packing: 3 500 pcs/reel 11.9 to 15.4 Outer edge of flange PS7241E-1A RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering * Peak reflow temperature * Time of peak reflow temperature * Time of temperature higher than 220C * Time to preheat temperature from 120 to 180C * Number of reflows * Flux 260C or below (package surface temperature) 10 seconds or less 60 seconds or less 12030 s Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow Package Surface Temperature T (C) (heating) to 10 s 260C MAX. 220C to 60 s 180C 120C 12030 s (preheating) Time (s) (2) Wave soldering * Temperature * Time * Preheating conditions * Number of times * Flux 260C or below (molten solder temperature) 10 seconds or less 120C or below (package surface temperature) One Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. 12/02/2004 A Business Partner of NEC Compound Semiconductor Devices, Ltd. |
Price & Availability of PS7241E-1A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |